LC-MS Vial & Cap Kits from Kinesis Inc.

New from Kinesis Inc. are a range of vial and cap kits developed specifically for the LC-MS Market. These kits feature a range fo vials from standard 1.5mL autosampler vials, high recovery vials, microvolumne inserts, polypropylene vials and other combinations with an extremely pure, high-grade, low-extractable cap.

As the following comparison illustrates the difference between our new LC-MS Caps and standard PTFE/Silicone Caps:

This comparison of MS data was done by filling each vial with methanol and inverting for one hour. The vials were then pierced three times with a direct injection electro spray quad mass spec. Extractables were below the picogram range.

Our LC-MS vials seal just as well as a standard PTFE/Silicone septa and puncture with far less force.

These come kit-packed in 100/pack. Choose clear, amber, PP (300uL or 700uL), high recovery, or microvolume insert as options. Call us or e-mail for pricing and more information.

Phone Toll Free: (866) 934-6353 Fax: (518) 490-1235 E-mail: sales@kinesis-usa.com Web: www.kinesis-usa.com

Clouseout on Omnifit C-Series Solvent Bottle Caps for HPLC

Omnifit has discontinued their C-Series Bottle Cap this year. These were great bottle caps loaded with solid features including:

• Omnifit's versatile Cap Connector which allows many connections depending on pressure requirements. O-rings, PTFE cones, or connections to a 1/4-28F flat-bottom port accommodate low to high pressures.
• Independent Valving on each connection.
• Free-spinning cap collar means no tubing twist when you remove the cap from the bottle
• Inert fluid paths with PTFE and PCTFE materials.
• Extra Adaptors allow connection to 0.5mm up to 4mm tubing with ease
• Optional barbed adaptors for soft-wall tubing
• Inlet check-valves and filters are also available

While remaining supplies last, we're offering Omnifit C-Series caps at 30% off list prices. Choose from three models to fit 38-340 bottles commonly used for HPLC reagents.

00938C-2V - 38-340 solvent bottle cap, 2-port, with valves

00938-3V - 38-340 solvent bottle cap, 3-port, with valves

00938-4V - 38-340 solvent bottle cap, 4-port, with valves

Phone Toll Free: (866) 934-6353 Fax: (518) 490-1235 E-mail: sales@kinesis-usa.com Web: www.kinesis-usa.com

Ultimate Microsampling Device from Kinesis Inc.

Precision 300 uL glass conical insert and 12x32 mm vial are one precise integral unit.
Compatible with the majority of autosamplers.
Available in short thread screw cap, crimp top and snap cap.

• Evaporation and cross contamination between insert and vial is eliminated with a virtual seal of insert to septa.
• Higher sample recovery with either bottom loading or side loading needles. Residual dead volume can be as low as 2 uL, depending on precision adjustment of instrument.
• Consistent sample recovery from vial to vial because the insert is always at same precise depth within the vial.
• Compatible with all autosamplers that utilize 12x32mm vials
• Vials are made in the USA from Class A Borosilicate Glass.
• Easy sample identification on white mat finish marking panel using pen, pencil or any other type of marking device.
• Wide mouth opening of vial has larger target area reducing possibility of bent needles.
• Clear and Amber vials available.

Call us or e-mail for more product information!

Phone Toll Free: (866) 934-6353 Fax: (518) 490-1235 E-mail: sales@kinesis-usa.com Web: www.kinesis-usa.com