Closed System HPLC Solvent Containment for Nearly any Waste Container

There is far greater awareness in laboratories about the safety and security of closed solvent-using systems like HPLC stations. More and more chemists, lab managers, and EH&S are now aware that HPLC systems and other stations can be closed even when adding waste to the container.


With Vaplock products, closing the waste side of the HPLC station is even more affordable with a wide range of secure manifolds for nearly any waste container including Justrite Centura, carboys, DOT containers, glass bottles, drums, and many, many more. Safety should be the prime consideration for choosing your waste container, but there is no need to go to the added expense of changing over your whole lab in order to close the system, secure waste lines, prevent leaks and spills, and scrub the organic vapor.


Vaplock manifolds are available for Methanol/ACN systems, mixed reverse phase and dilute normal phase solvents, and complete normal phase HPLC stations with materials selected to withstand the solvents employed.

We always recommend a complimentary site evaluation prior to ordering. This ensures that you are getting the most effective, complete, and lowest cost range of Vaplock parts to accomplish your safety and other EH&S goals. Following a site evaluation by a skilled technician and installer, customers will receive a detailed quotation and, if requested, a written proposal and installation guide. For customers that do not have time or personnel to install Vaplock manifolds, Kinesis Inc. offers this as a service. Ask about promotions related to products installed by Kinesis Inc. for additional savings.

For more information and technical assistance, call us directly or send an e-mail. More information is also available on our company website.

Phone Toll Free: (866) 934-6353 Fax: (518) 490-1235 E-mail: sales@kinesis-usa.com Web: www.kinesis-usa.com

LC-MS Vial & Cap Kits from Kinesis Inc.

New from Kinesis Inc. are a range of vial and cap kits developed specifically for the LC-MS Market. These kits feature a range fo vials from standard 1.5mL autosampler vials, high recovery vials, microvolumne inserts, polypropylene vials and other combinations with an extremely pure, high-grade, low-extractable cap.

As the following comparison illustrates the difference between our new LC-MS Caps and standard PTFE/Silicone Caps:

This comparison of MS data was done by filling each vial with methanol and inverting for one hour. The vials were then pierced three times with a direct injection electro spray quad mass spec. Extractables were below the picogram range.

Our LC-MS vials seal just as well as a standard PTFE/Silicone septa and puncture with far less force.

These come kit-packed in 100/pack. Choose clear, amber, PP (300uL or 700uL), high recovery, or microvolume insert as options. Call us or e-mail for pricing and more information.

Phone Toll Free: (866) 934-6353 Fax: (518) 490-1235 E-mail: sales@kinesis-usa.com Web: www.kinesis-usa.com

Clouseout on Omnifit C-Series Solvent Bottle Caps for HPLC

Omnifit has discontinued their C-Series Bottle Cap this year. These were great bottle caps loaded with solid features including:

• Omnifit's versatile Cap Connector which allows many connections depending on pressure requirements. O-rings, PTFE cones, or connections to a 1/4-28F flat-bottom port accommodate low to high pressures.
• Independent Valving on each connection.
• Free-spinning cap collar means no tubing twist when you remove the cap from the bottle
• Inert fluid paths with PTFE and PCTFE materials.
• Extra Adaptors allow connection to 0.5mm up to 4mm tubing with ease
• Optional barbed adaptors for soft-wall tubing
• Inlet check-valves and filters are also available

While remaining supplies last, we're offering Omnifit C-Series caps at 30% off list prices. Choose from three models to fit 38-340 bottles commonly used for HPLC reagents.

00938C-2V - 38-340 solvent bottle cap, 2-port, with valves

00938-3V - 38-340 solvent bottle cap, 3-port, with valves

00938-4V - 38-340 solvent bottle cap, 4-port, with valves

Phone Toll Free: (866) 934-6353 Fax: (518) 490-1235 E-mail: sales@kinesis-usa.com Web: www.kinesis-usa.com

Ultimate Microsampling Device from Kinesis Inc.

Precision 300 uL glass conical insert and 12x32 mm vial are one precise integral unit.
Compatible with the majority of autosamplers.
Available in short thread screw cap, crimp top and snap cap.

• Evaporation and cross contamination between insert and vial is eliminated with a virtual seal of insert to septa.
• Higher sample recovery with either bottom loading or side loading needles. Residual dead volume can be as low as 2 uL, depending on precision adjustment of instrument.
• Consistent sample recovery from vial to vial because the insert is always at same precise depth within the vial.
• Compatible with all autosamplers that utilize 12x32mm vials
• Vials are made in the USA from Class A Borosilicate Glass.
• Easy sample identification on white mat finish marking panel using pen, pencil or any other type of marking device.
• Wide mouth opening of vial has larger target area reducing possibility of bent needles.
• Clear and Amber vials available.

Call us or e-mail for more product information!

Phone Toll Free: (866) 934-6353 Fax: (518) 490-1235 E-mail: sales@kinesis-usa.com Web: www.kinesis-usa.com

New Larger Product Line of Deuterium Lamps for HPLC Detectors

Kinesis Inc. announce a wider range of replacement lamps for HPLC detectors and UV/Vis spectrophotometers. This includes the largest number of high-quality long-life replacement lamps ever available!

Click here to see the full range of instrument models supported by Kinesis Replacement Deuterium Lamps!

Several points differentiate Kinesis lamps from others:

• Each lamp type is application-matched for each instrument ensuring OEM specifications and lifetime are met or exceeded
• High-quality long life lamps from the world's leading manufacturers
• 1000 hour warranty and 2000 hour warranty lamps available

Kinesis manufactures/pre-aligns Deuterium lamps for end-users, independent instrument service companies and distributors. In recognizing the importance of using lamps supplied by the OEM’s, Kinesis has formed strong partnerships with manufacturers who produce the majority of the lamps fitted in today’s leading detectors, including the Agilent 1100 and Waters 2487 models. Bare lamps supplied directly to Kinesis are precision aligned and tested at our facility in accordance with our stringent ISO 9000 certified procedures.

All Kinesis lamps are certified recording the date of manufacture, serial number, tester’s name and the intensity counts reading for future traceability. Only lamps made to the strictest tolerances receive the Kinesis Guaranteed Lamp Seal. This means that Kinesis provides lamps without any compromise on quality compared with OEM specifications. We offer a comprehensive range including the Shimadzu SPD10A, Waters 2487 and both Agilent 1100 DAD and VWD. A range of lamps are kept in stock in the factory and our sales offices, close to our customers ensuring that when replacements are needed there is no delay.

To assist our customers with pre-sale information and after-sales support Kinesis technical team of experts now include detector lamp R&D and Applications Engineering specialist. Kinesis are able to offer a new, higher level of technical support to our customers which was previously only available to the instrument OEMs.

Premium quality lamps, available from stock with the highest level of technical support before and after the sale. Contact us today!

http://www.kinesis-usa.com/

Toll Free 866.934.6353

sales@kinesis-usa.com

View the new Omnifit Fittings Brochure Online as a Kinesis Flipbook

Kinesis Inc. have published the new Fittings Systems brochure as a convenient to read flip book. Click here to view it online now!

The new brochure details specifications for fittings that can be used on 1/16" OD, 1/8" OD, and 3/16" OD tubing for connections ranging from 30 psi up to 1000 psi.

New highlights include:

• An easy to read Selection Guide for choosing the correct fittings based on tubing size and pressure requirements
• New Click-N-Seal fitting nuts that let you feel and hear when you reach the correct tightness of the fitting nut.
• New 3/16" OD tubing fittings.
• Assembled custom tubing sets

In addition to providing assembly service using Omnifit products, Kinesis Inc. also offer installation of complex tubing assemblies on your in-house systems. Call or e-mail for details.

Click here to view the entire range of Omnifit Fittings, adaptors and other parts. Buy online!

Phone Toll Free: (866) 934-6353 Fax: (518) 490-1235
E-mail: sales@kinesis-usa.com Web: www.kinesis-usa.com

NEW! - SPE Method Development Recommendations for Melamine from Milk

Biotage have released recommendations for method development for melamine from milk under document IST0413C using their Confirm HCX cartridge. Call Kinesis Inc. at (866) 934-6353 or e-mail sales@kinesis-usa.com to get a copy of this method. Isolute Confirm HCX 100mg/3mL cartridges and other sizes are available from Kinesis Inc. Click here for pricing!